Preparation First.
Stage 1
Preparation First, we make suitable arrangements on site so that we can easily clean it up after we have finished our work.
All traces of moss, algae, lichen, pollutants and carbonation are removed by cleaning the tiles with a high pressure jet. The gutters are cleaned of all leaves from both inside and outside. This process is performed under great care so as not to block any existing down pipes.
Preparation First, we make suitable arrangements on site so that we can easily clean it up after we have finished our work.
All traces of moss, algae, lichen, pollutants and carbonation are removed by cleaning the tiles with a high pressure jet. The gutters are cleaned of all leaves from both inside and outside. This process is performed under great care so as not to block any existing down pipes.
Repairs.
Stage 2
All worn out mortar between crests, ridge and hip tiles are removed and replaced with a fibre re-enforced polymer mortar and re-bedding any loose ridges and crests. Any broken, cracked and damaged tiles are replaced with the same or similar type. Any damaged mortar verges are re-sealed ready for the next stage.
All worn out mortar between crests, ridge and hip tiles are removed and replaced with a fibre re-enforced polymer mortar and re-bedding any loose ridges and crests. Any broken, cracked and damaged tiles are replaced with the same or similar type. Any damaged mortar verges are re-sealed ready for the next stage.
Sealer Binder
Stage 3
The existing surfaces shell be sealed with BinderCrete.
This prevents any future growth of those unwanted guests thereby preventing underneath spoilage
of the finished coating. Binds and seal porous surfaces helping a uniform top coat.
The existing surfaces shell be sealed with BinderCrete.
This prevents any future growth of those unwanted guests thereby preventing underneath spoilage
of the finished coating. Binds and seal porous surfaces helping a uniform top coat.
First Coat.
Stage 4
Airless spray equipment is used to apply the final 2 coats in your
chosen colour. This final coat reseals the roof completely forming a water
barrier repelling any water from being absorbed by the roof tiles.
Airless spray equipment is used to apply the final 2 coats in your
chosen colour. This final coat reseals the roof completely forming a water
barrier repelling any water from being absorbed by the roof tiles.
|
|
|
