|
BinderCrete
Western Australia Head Office:
Huecoat Paint U1 14 Fields Street, PINJARRA P: 9531 1184 |
Huecoat Bindercrete is one of the most universal binding and sealing PVA,
used in the construction, building and renovating industries.
Huecoat`s Bindercrete uses includes,
Binding for carpentry joinery & general craftwork, ridge capping, toppings & repairs, rendering & plastering, tile fixing & grouting, sealing, binding & dustproofing, scrap booking and decorative finishes.
Bindercrete quick reference can be diluted with water tor the following:
A sealing coat for Timber, Render and concrete: (Bindercrete 1: water 4)
A binding coat timber to timber: (Bindercrete 1: water 1)
Bindercrete as an admixture to sand and cement: (Bindercrete 1: water 10)
Huecoat Bindercrete has been specifically designed as an admixture for cement renderings
where improved substrate adhesion and thin film cure can be expected.
In addition, Bindercrete® can be used as a base for packaging adhesives, textile sizes
and wood bonding adhesives.
used in the construction, building and renovating industries.
Huecoat`s Bindercrete uses includes,
Binding for carpentry joinery & general craftwork, ridge capping, toppings & repairs, rendering & plastering, tile fixing & grouting, sealing, binding & dustproofing, scrap booking and decorative finishes.
Bindercrete quick reference can be diluted with water tor the following:
A sealing coat for Timber, Render and concrete: (Bindercrete 1: water 4)
A binding coat timber to timber: (Bindercrete 1: water 1)
Bindercrete as an admixture to sand and cement: (Bindercrete 1: water 10)
Huecoat Bindercrete has been specifically designed as an admixture for cement renderings
where improved substrate adhesion and thin film cure can be expected.
In addition, Bindercrete® can be used as a base for packaging adhesives, textile sizes
and wood bonding adhesives.
Lime Wash
|
What you need:
Huecoat Bindercrete Water Lime Mineral Turpentine Hints and Tips: For best results, stand limewash overnight and remix prior to use. Step 1: Preparation Before applying a sealing coat of Bindercrete to a concrete surface, ensure it is free from dirt, grease, oil and loose material. Thorough preparation of the area is of key importance and correct preparation will ensure a better quality and longer lasting job. Before applying the limewash, seal with a coat of diluted Bindercrete. MIX – 1 part BinderCrete with 4 parts water Apply to surface and allow to dry. Step 2: Lime wash To make 20 litres of limewash you will need: 13 litres of water 4 litres of BinderCrete Slowly add 6 kg of lime and mix to a smooth paste. Then add 200 ml of mineral turpentine. Stir well. Finally add 1 litre of water and stir. Colour can be added at this time. |
